Muzzle brakes & Air Strippers

Postage will be £2.50 per item ( first class recorded )

Muzzle Brakes:-

All the muzzle brakes are finished turned from the thread on a dummy barrel to ensure all diameters are concentric when fitted to your rifles.  All exit bores are 8.5mm diameter (unless otherwise requested) and are recessed and crowned.  There are 18 precision-machined ports going into the expansion chamber allowing uniform escape of compressed gasses.

These are a thread protector, barrel compensator / muzzle brake to fit all rifles with a standard 1/2" - 20 U.N.F. thread on the end of the barrel.

As well as protecting the exposed thread on the end of the barrel and looking GOOD, these reduce muzzle 'wobble' but best of all reduces muzzle flip and therefore sight recovery time by over 50% enabling follow-up shots to be taken quicker and more accurately.

I can also supply all types of muzzle brake with the ½” – 28 N.E.F. (American National Extra Fine) thread if required.  Any other thread requirements then please ask me and I will do my best to accommodate you.

Note:- Recent legislation states that moderators for firearms now have to be proofed on the barrel they are to be fitted on……..  You must state when purchasing one of these that they are for use on an air rifle.

Moderators for Air Guns ONLY:-

Made from aluminium with a cavity and vented disc design, extremely quiet on everything I have tried them on.  Standard ½” U.N.F. female thread fitting.

The longer one is 210 mm long and weight 220 gram, the shorter is 110 mm long and weighs 110 gram.  Both are 31 mm in diameter.

 

 

 

Price:- Long £49,Medium £47 short £45  (Aluminium) no longer available in brass . 

 

 

This was made for an AirArms S410 but can be made for any air rifle.

 

These are made from polished aluminium and are fixed to the 10 mm dia portion at the end of the barrel with two 4mm diameter stainless steel grub-screws. The small diameter is 16mm for a length of 25mm and then tapers out to 18.5mm diameter.  This ensures that the filler cap and the adaptor can be fitted and removed without the brake having to be removed from the rifle.  The larger diameter has 18 precision machined vents in six sets of three which go into an internal expansion chamber. If you need a bit of weight on the end of the barrel then these can also be supplied in brass at a small premium.      (Aluminium):-  £23.99 or  (Brass):-£26.99   

 

   

Adjustable Air Strippers

These can be made for any air rifle.The examples in the photograph are from the top:- 

 

Steyr LG100/110 series, grub-screw fixing.

 

Air Arms S400 Series, grub-screw fixing. 

 

HW100, screw-on to the threaded barrel.

 

All aluminium £64.99

Aluminium body with brass cone  £69.99

no longer available in brass.

 

Non Adjustable Air Stripper

 

These are made from polished aluminium, have an overall length of 120mm and are fixed to the 10 mm dia portion at the end of the barrel with two 4mm diameter stainless steel grub-screws. The small diameter is 16mm for a length of 25mm and then tapers out to 18.5mm diameter.  This ensures that the filler cap and the adaptor can be fitted and removed without the brake having to be removed from the rifle.  The air stripper/muzzle brake has 18 precision machined vents in six sets of three. If you need a bit of weight on the end of the barrel then these can also be supplied in brass at a premium. 

 

The bore of the air stripper is made with minimum pellet clearance to maintain efficiency. 

 

Please remember to specify what calibre rifle this is to be fitted on.

 

(All Aluminium):- £40.99

(Alluminium with Brass end):-£43.99

no longer available in brass

 

 

Muzzles brakes

Typre "A"

Type "A"                                                                                                                     Made from polished aluminium, this is 25 mm in diameter, reducing to 17mm where it meets the barrel (although I can make it to your own barrel diameter for a step-less transition if required).  It is 47 mm long and weighs 580 grain , 1/2" UNF fitting.

(Aluminium):-  £20.99 

Type "B"

 

Type "B"   

Made from polished aluminium, this is 19 mm in diameter, reducing to 17mm where it meets the barrel (although I can make it to your own barrel diameter for a step-less transition if required).  It is 47 mm long and weighs 280 grain , 1/2" UNF fitting.           

(Aluminium):-  £20.99 

Type "C"

Type "C"   

Made from polished aluminium, this is 17mm in diameter (although I can make it to your own barrel diameter for a step-less transition if required).  It is 47 mm long and weighs 180 grain. 1/2" UNF fitting.

(Aluminium):-  £20.99 

Type "F"

Type "F"

Made from polished aluminium, this is 25 mm in diameter over the knurling, reducing to 17mm where it meets the barrel (although I can make it to your own barrel diameter for a step-less transition if required).  It is 47 mm long and weighs 735 grain.

This one is a little more fancy than the previous ones, 1/2" UNF fitting.

 (Aluminium):-  £22.99

Type "G"

Type "G"

Made from polished aluminium, this is 25 mm in diameter over the knurling, reducing to 17mm where it meets the barrel (although I can make it to your own barrel diameter for a step-less transition if required). 

It is 100 mm long and weighs 1460 grain.120mm long muzzle brake 1/2" UNF fitting.

(Aluminium):-  £33.99 

Type "H"

Type ‘H’

 This is for the Ruger 10/22 with the non-threaded .920” hammer forged target bbl.The main body is 72mm long.  It is held on the barrel by three 5mm grub screws that press onto a removable inner sleeve which then grips the barrel without marking it (Clever or what…..). Muzzle brake for the Ruger 10/22  .920" diameter non threaded bull barrel.  Aluminium :-£39.99

Aluminium Thread Protector

Aluminium thread protector/mini muzzle brake, 16 mm dia, 1/2" UNF fitting.

(Aluminium):-  £12.99  (Plain ones without the holes £10.99)